Configure a document approval process

PDF
Products
All Creatio products

Example. Create a business process for approving documents in the Documents section. Each document is sent for approval manually by launching the process in the section. All employees in the Financial department role can approve documents. Additionally, all employees eligible for approving documents receive an email notification once the approval is created. The employee awaiting the approval receives an email once the document is approved. If approved, the document status is changed to “Active”. If it was not approved, the document status is changed to “Draft”, and Creatio automatically creates an activity for the responsible employee to revise the document.

The configuration procedure includes the following general steps:

  1. Set up the approval case as shown on Fig. 1.

  2. Set up running the approval business process for records that require approval in the corresponding section.

    Attention. Before creating and configuring an approval business process, make sure that the Enable approval in section checkbox is selected for that section in the section wizard. Read more>>>

    Fig. 1 A business process for approving documents
    chapter_process_creation_designer_document_approvement.png

Configure business processes

  1. Open the Process library section and add a new process.

  2. Enter the name of the process in the Process field (e.g., “Document approval”).

  3. Open the Parameters tab and add a new parameter. This parameter will bind process instances to the documents that needs to be approved (Fig. 2). Once the process is launched from the Documents section, the parameter will be populated with the corresponding document. To add a process parameter:

    1. Click the Add parameter button, and select “Lookup” in the drop down menu.

    2. In the Title field, enter "Document".

    3. In the Lookup field, select "Document".

    4. Save the changes.

      Fig. 2 Approval business process properties
      chapter_process_creation_designer_set_process_parameter.png
  4. Add the Read data element from the User actions group to the process diagram. Enter the name of the element in the Read data field (e.g., “Read document data”). This element obtains the process parameters necessary to perform the next steps.
  5. Set up the element properties (Fig. 3):
    1. In the Which data read mode to use? field, select “Read the first record in the selection”.

    2. In the Which object to read data from? field, select ”Document”. The business process will read the value in the Owner field of this object to send notifications about the approval status to the document owner.

    3. In the How to filter records? area, set the filter “Id = Document”. To do this, click <Add condition>, select the “Id” column, select the Compare with parameter value in the displayed menu, and choose the Document process parameter in the in the appeared window.

    4. The default settings in the How to sort records? area are configured for sorting in ascending order.

      Fig. 3 The "Read document data" element properties
      chapter_process_creation_designer_read_the_document.png
  6. Add the Approval element from the User actions group to the process diagram (e.g., “Approve document”). The element will be activated once the process is launched for a record in the Documents section.
  7. Set up the element properties (Fig. 4):
    1. In the Approval purpose field, select “Approval required”.

    2. In the Approval object field, select “Document”.

      Note. If you cannot find the Document object in the list, the approval procedure might be disabled for the Documents section in the section wizard. More information about the procedure for configuring approvals is available in the Approvals article.

    3. In the Record Id field, click btn_process_element_settings_lookup00025.png and select the “Process parameter” option, then choose the “Document” process parameter in the appeared window.

    4. In the Approver field, select “Role”.

    5. In the Role field, select “Lookup value option” and choose the “Financial department” value from the the “Roles (view)” lookup. All employees in the Financial department role will be able to approve documents.

    6. Select the Approval may be delegated checkbox to be able to delegate an approval to a different employee.

    7. In the Send email notification field, configure automatic email notifications for the approvers and the document owner employee.

      • Select the Notify that approval is required checkbox.

      • In the Email template field, click btn_process_element_settings_lookup00026.png and add an email template for a notification from the Email message template lookup.

      • Select the Notify about the approval result checkbox.

      • In the Recipient field, click the btn_parametres_window00027.png button and select “Contact” in the menu, and choose the “Process parameter” option. Then, select the “Owner” parameter from the “Read document data” element in the appeared window. The owner of the document will receive an email notification about the approval.

      • In the Email template field, click btn_process_element_settings_lookup00028.png and add an email template for a notification from the Email message template lookup.

        Attention. Set up the mailbox for email notifications in the Mailbox for sending email with information on approval system setting. Access the system setting in the Process Designer by clicking the btn_com_information00029.png button in the Send email notification area.

        Note. Create email templates in the content designer, using the Approvals in the Documents section object. The approval objects are created automatically, when you select the Enable approval in section checkbox in the section wizard. For example, if you select the Enable approval in section checkbox in the Documents section wizard, a new object “Approvals in section Document” will be created. If the lookup of the Enable approval in section does not contain the template you need, click btn_com_add_tab00030.png in the right part of the field to add a new email template. Learn more about creating an email template in the Create an email template article.

        Fig. 4 The Approval element parameters
        chapter_process_creation_designer_visa_settings.png
  8. Add two Modify data elements of the System actions group to the process diagram. The “Change document status to Draft” and “Change document status to Active” elements are used to change the document status based on the approval result. Set up the element properties (Fig. 5): The parameters of the two elements are identical, except for the resulting document status.
    1. In the Which object to read data from?, select “Document”. This will be set by default if approvals are enabled in the Documents section. In this case, it is the “Chart” component.

    2. In the How to filter records? area, set the filter “Id = Document”. To do this, click <Add condition>, select the “Id” column, select the Compare with parameter value in the displayed menu, and choose the Document process parameter in the in the appeared window.

    3. In the Which column values to set for modified records? area, select the resulting document status. If approved, the document status changes to “Active”. If not approved, the document status changes to “Draft”. To do this, click <Add field>, and select the “Status” column. In the Status field, click the btn_process_element_settings_lookup00031.png button, select “Lookup value”, and choose the following values: “Active” for the “Change document status to Active” element and “Draft” for the “Change document status to Draft” element.

      Fig. 5 The “Change document status to Active” element parameters
      chapter_process_creation_designer_document_status_actual.png
  9. Copy the previously created Read data element of the System actions group – “Read document data”  – and place it after the Change document status to Draft element on the diagram. This element determines the responsible individual for re-working the document.
  10. Add the Perform task element from the User actions group to the process diagram (“Revise the document”). This element will create a task (activity) for the individual to edit the document if it was not approved.
  11. Set up the element properties (Fig. 6):
    1. Enter the name of the task in the What should be done? field.

    2. Select the start time of the task in the Start in field, and the approximate duration of the task in the Planned duration field. The value of the Start in field determines a time period at the end of which the task will be scheduled. In the Planned duration field, specify the approximate duration of the task.

    3. Select the Show in calendar checkbox to display the task in the responsible individual’s calendar.

    4. In the Who performs the task? field, click btn_process_element_settings_lookup00032.png and select the “Process parameter” option. Then, select the “Owner” parameter from the “Read document data” element in the appeared window.

    5. In the Connected to field, connect the task to the document. To do this:

      • Click the btn_button_connections00033.png button and add the “Document” column.

      • Click the btn_process_element_settings_lookup00034.png button and select the “Process parameter” option, and choose the “Document” process parameter in the appeared window.

        Fig. 6 The "Revise the document" element properties
        chapter_process_creation_designer_document_finalization_task.png
  12. After creating the process elements, connect each element with the next one by using the arrows in the upper right corner of the selected element.
    1. Use conditional flows (btn_com_mnu_add_flow_default.png) to connect the “Approve document” element to the “Change document status to Draft” and “Change document status to Active” elements.

    2. Click the conditional flow connecting the “Approve document” element and the “Change document status to Draft” element and select the “Negative ”approval result.

    3. Click the conditional flow connecting the “Approve document” element and the “Change document status to Active” element and select the “Positive ”approval result.

    4. Use sequence flows (btn_com_mnu_add_flow.png) to connect all other elements.

  13. Save the business process. Once saved, configure the start of a business process.

Set up business process launch

The process is launched by clicking the Run process button on the record page or in the section list. The button is not displayed by default and requires additional setup (Fig. 7).

To configure the button, connect the document approval process to records for which it will be launched. To do this:

  1. Click the View button in the Contacts section and select the Open section wizard command.

  2. Open the Business process tab. Click the btn_com_add_tab00035.png button on the Run business process from section detail. The window of the business process launch settings will be opened.

  3. Select the “Document approval” process in the Which process to run? field.

  4. To start the process for separate section records, select the “For selected record” radio button.

    The Process parameter where the record is passed field is populated automatically with the “Document” parameter of the “Document approval” process.

  5. Save the changes in the window and the section wizard.

    Fig. 7 Add a business process to a section
    chapter_process_creation_designer_run_process_for_selected_record_setup.png

    As a result, you will be able to launch the approval process for any record of the Documents section (Fig. 8).

    Fig. 8 Launch the process from the Documents section list
    chapter_process_creation_designer_document_approvement_run_process_from_the_list.png

Set up custom email templates for approval notifications

Use the Approval process element to set up custom logic for approving various Creatio records (documents, invoices, orders, etc.) by Creatio users. Both the approver and the user who submits the record for approval will receive email notifications about the approval procedure.

You can set up custom email templates for these notifications. Note that approval notification emails do not require additional Send email elements, and are configured in the Approval process element.

Example. During a document approval process (Fig. 42), the approver must receive an email notification, containing document type, number and the name of the user who submitted the document for approval. The user who submitted the document for approval, must receive a notification about the approval result.

The instructions below assume that you have enabled approvals in the Documents section, added the Approval element on the process diagram (Fig. 9) and set up its properties. Read more about enabling approvals in the Approval process element article. More information about the approval process setup is available in a separate Configure a document approval process guide.

Fig. 9 A business process for approving documents
chapter_process_creation_designer_document_approvement00036.png

To set up templates:

  1. Populate the fields of the Approval element setup area. If the Approval section field is populated, available email templates for approval notification will be filtered according to the selected section.

    Note. More information about setting up the Approval element as part of an approval process is available in the Configure a document approval process guide.

  2. Select the Notify that approval is required checkbox. As a result, whenever a record is submitted for approval, a notification will be sent to the “approver” user. If “Role” is selected in the Approver field, the notification will be sent to all users with the corresponding role.

  3. In the Email template field, click btn_com_add_tab00038.png (Fig. 10). A new email template window will open on a new tab.

    Fig. 10 Opening the email template of an approval notification
    chapter_bpmn_approval_email_add_template.png
  4. In the new template window, populate the Template name field. Note that if you populated the Approval section field earlier, the Macro source field will be already populated with the corresponding approval object (in this case – the “Approvals in section Document” object, (Fig. 11).

    Fig. 11 Approval notification template settings
    chapter_bpmn_approval_email_template_setup.png
  5. Click the Edit button. The template will open in the content designer.

    Note. Basic instructions on working with the content designer are available in the “Create an email template” article.

  6. Enter the email subject.

  7. Drag&drop a content block (e.g., Text) to the template. Replace the text in the Text block with your own.

  8. Add regular email template macros:

    1. Place your cursor in the text block, click btn_email_temlate_macro.png and choose Basic macro (Fig. 12). The Macros selection window opens.

      Fig. 12 Accessing the macros in the content designer
      chapter_bpmn_approval_email_add_macro.png

      Note. For users of Creatio version 7.13.2 and below, the command names are different. The command for selecting standard macros is called Select macros, and the Select column command is used to create a custom macro.

    2. In the Macros selection window, choose the needed macro and click Select. The available macros are divided into several groups.

      You can specify data of the email recipient contact (“Recipient” group), information of the user who runs the approval process (“Current user” group) or the owner of the record being approved (“Owner” group). For example, to add the name of the user who submitted the document for approval, select Current user > Contact name macro (Fig. 13).

      Fig. 13 Adding a macro to the email text
      chapter_bpmn_approval_email_select_macro.png

      The corresponding macro will be added to the email text at the insertion point.

  9. Add email template macros that are based on the “Macro source” object.

    1. Place your cursor in the text block, click btn_email_temlate_macro00039.png and choose Select column. The Select column window (Fig. 48) opens.

    2. In the Select column window, choose the column of the object (that you specified in the Macro source field) whose values must be added to the notification text. The “approval” object is automatically added once you enable approvals in the section wizard and contains data from the approval itself, e.g., Approval purpose, Approver’s name, etc.

    3. You can add macros for columns of any object, provided it is linked to the “approval” object, e.g., you can add columns of the document being approved. To select a column of a linked object, Click + next to the “approval” object name in the Select column window (Fig. 14). For example, to add the approved document’s type and number, add the Type and Number columns from the linked Document object.

      Fig. 14 Selecting columns of a linked object as macros
      chapter_bpmn_howto_approval_email_object.gif

      As a result, your template will look like this (Fig. 15):

      Fig. 15 Example of approval notification template
      chapter_bpmn_approval_email_template_result.png
  10. Save the changes in the content designer and the email template.

  11. Select the Notify about the approval result checkbox and populate the Recipient field. You can specify any Creatio contact, account or an email address. For example, you can send approval result notifications to the user who submitted the record for approval, record owner, etc.

  12. Repeat steps 3-10 to create an approval notification email template.

  13. Save the process diagram.

    As a result, whenever a user submits a record for the approval using this process, email notifications will be sent according to the custom templates.