Manage calls

PDF
Products
All Creatio products

In Creatio, all base telephony features (for example, receiving incoming calls and making outgoing ones, putting calls on hold and transferring them to another number) are available on the communication panel. To display the Calls tab, click the btn_com_open_cti_panel.png button.

Set up phone integration to enable call management in Creatio. Use a headset to make and receive calls.

Make calls 

Outgoing call can be made in a number of ways. You can either dial the number manually on the communication panel, make a call using the calls history or click the call button on the contact page.

Dial by phone number 

If you know the phone number that you want to call:

  1. On the Calls tab, enter the phone number in the tab field and click the call button or press the Enter key (Fig. 1).

    Fig. 1 Manual dial
    scr_cti_outcome_call.png

    You can also make a call by clicking the call button next to the name of the needed subscriber in the calls history (Fig. 2).

    Fig. 2 Dial from the calls history
    scr_cti_outcome_call_from_history.png
  2. Wait for the connection (Fig. 3).

    Fig. 3 An outgoing call
    scr_cti_outcome_call_unknown.png
  3. If the connection is successful, the call will be switched to the conversation mode.

  4. To end the call, click the end call button.

Dial by phone number 

If you know the name of the contact that you want to call:

  1. On the Calls tab, enter the contact name or a part of it in the tab field. The system will search for contacts whose name contains the entered fragment and will display those contacts on the tab.

    Note. To start searching, enter three or more characters.

  2. Find the needed subscriber in the list and click the call button next to the phone number you want to call (Fig. 4).

    Fig. 4 Search for a subscriber by name
    scr_cti_outcome_call_several_abonents.png
  3. Wait for the connection.

Quick dial from record pages and the section list 

You can call a contact (an account) from the contact/account page or from the section list.

  1. To start a call from the contact page:

    1. On the Communication options detail, click the phone number or the call button next to the number you want to call (Fig. 5).

      Fig. 5 Quick dial from the record page
      scr_cti_quick_dial.png
  1. Wait for the connection.

  2. To make a call from the section list, click the phone number that is displayed as a link (Fig. 6).

    Fig. 6 Quick dial from the section list
    scr_cti_quick_dial_from_list.png

Receive calls 

By default, the section is hidden. It expands in the right side panel of the screen when incoming call is received (Fig. 7).

Fig. 7 An incoming call
scr_cti_income_call_unknown.png
  1. To start the conversation, click the call answer button or pick up the phone if the button is unavailable.

  2. To decline a call, click the end call button.

    Note. The type of the Call Center used in Creatio determines whether the answer button is displayed for an incoming call or not. For example, the answer button is unavailable when working with Asterisk Call Center. If your telephone network supports this feature, and you would like to use it, open the Call Centre parameters setup page and select the Enable picking up phone from application checkbox. The setup page can be opened from the user profile.

Identify the caller 

In Creatio, a subscriber is identified by the phone number during both an outgoing or an incoming call.

  1. If a subscriber (a contact or an account) is identified by the phone number while calling, the name of the subscriber will be displayed on the call panel (Fig. 8).

    Fig. 8 Identify the subscriber
    scr_cti_income_call_one_abonent.png
  2. If the same phone number is specified for more than one contact or account, the list of those subscribers will be displayed on the call panel. To select the needed subscriber, click the subscriber's record in the list (Fig. 9).

    Fig. 9 Select one of the contacts found by the phone number
    scr_cti_income_call_several_abonent.png
  3. If you need to change the selected subscriber, open the additional menu next to the subscriber's name and select the Select another record option (Fig. 10).

    Fig. 10 Select another subscriber
    scr_cti_income_call_other_abonent.png

Note. The information about the selected subscriber will be saved in the call history in the Calls section.

If a subscriber is not identified by the phone number while calling, at the end of th call you will be able to create a contact or an account or connect a call to the existing contact or account via the calls history.

Put calls on hold 

While you are on a call, you can put the call on hold so that the subscriber is still on the line but cannot hear you.

Click the btn_cti_pause_new.png button on the call panel to put a call on hold. Click the btn_cti_pause_on_new.png button to resume conversation.

Note. The call cannot be transferred or finished when it is on hold.

Transfer calls 

While you are on a call, you can transfer the call to another phone number. When using the Avaya, Webitel, Finesse, TAPI, Infinity, and Asterisk connectors, blind (unconditional) transfer is available for all calls.

Note. To enable blind transfer, select the Use blind transfer checkbox in the user profile.

To transfer the call to another agent without interrupting the call:

  1. Click the btn_cti_transfer_new.png button on the call panel. An additional field will be displayed. Use this field to enter the phone number that you want to transfer the call to. Also, the calls history will become available on the tab. Use it to transfer the call to a subscriber that you recently contacted.

  2. Enter the phone number or select the needed subscriber from the calls history and click the call button (Fig. 11). You can also find the needed subscriber by name.

    Fig. 11 Dial when transferring the call
    scr_cti_call_transfer_input_number.png
  3. The call will be put on hold, and the system will start establishing the connection with the subscriber whom you transfer the call to. The information about subscribers will be displayed on the call panel (Fig. 12).

    Fig. 12 Connect to another subscriber when transferring the call
    scr_cti_call_transfer_transfering.png
  4. To quickly transfer the call, put down the phone, so both subscribers will be connected, and you will be disconnected from the conversation.

  5. To make an attended transfer, wait for the connection with the subscriber whom you transfer the call to. In case if the connection is successful, the call panel will display additional buttons used to finish the transfer or to cancel it (Fig. 13).

    Fig. 13 Talk to a subscriber while transferring the call
    scr_cti_call_transfer_answer.png

Make and receive video calls 

In Creatio, you can make video calls if Webitel integration is configured in Creatio. Video communication is available only for internal calls.

You can enable/disable video calls in Creatio. To manage video calls setup:

  1. Open the user profile page by clicking the Profile image button on the main page of the application.

  2. Click the Call Center parameters setup button.

  3. On the displayed page, select/deselect the Use video checkbox to enable/disable video calls.

    When video calls are enabled, during the call, you see the video image of the user that the connection is established with and share your own video image.

In the video call mode, the communication panel additionally contains the video area and video call controls, such as a seek bar and timer that indicates the time passed since the call start.

Check the calls history 

You can view the recent calls history on the communication panel. It is available if the user is neither in a conversation mode nor searching for a subscriber. The history is also available when transferring a call to another number.

The calls history chronologically displays the recent incoming, outgoing and missed calls, and brief information about the accounts/contacts that a connection was established with (Fig. 14).

Fig. 14 The calls history
scr_cti_call_history_example.png

Note. The number of calls displayed in the history can be set up in the “Number of records on the “Calls history“ tab“ system setting.

Note. Do not close the browser window when making a call via the Creatio interface for proper saving the call history. If the window was closed during the conversation, the call ent dime and its duration will not be saved.

The calls history displays information only about the latest communication session with a certain subscriber (account or contact). For example, if you call several numbers specified on the Communication options detail of a contact, the calls history will display one record for this contact with the number that was dialed last.

If you called a subscriber and now you need to call another of his/her numbers, go to the contact/account page from the calls history and make a call from the subscriber page.

To do that, in the calls history, click the name of the contact/account. It is displayed as a link (Fig. 15). The subscriber page will open. On the page, select the needed number from the numbers available on the Communication options detail. You can call directly from the contact/account page by clicking either the phone number or the call button next to the number on the Communication options detail.

Fig. 15 Open a contact page from the calls history
scr_cti_call_history_go_to_page.png

If the same phone number is associated with several subscribers (contacts and/or accounts) in the system, then when the connection is established, different subscribers will be identified, and the calls history will display separate records for each contact/account (Fig. 16).

Fig. 16 The calls history for one number associated with several users
scr_cti_call_history_same_number.png

In addition to viewing completed incoming and outgoing calls, you can create a contact or account, connect the call with an existing contact and display connected activities. To process a call, use the menu, which you can open by clicking the scr_cti_button.png button (Fig. 17).

Fig. 17 The call processing menu
scr_cti_add_smt.png

To add a contact for the call subscriber, select Create contact. New contact page will open. After saving the contact, the corresponding phone number will be automatically added to the Communication options detail. By default, “Mobile phone” will be set as the communication option type.

You can add an account based on the call subscriber. To do this, select the Create account menu command. After saving the account, the corresponding phone number will be automatically added to the Communication options By default, “Primary phone” will be set as the communication option type.

To connect a call to an existing contact or account, select the Add to existing contact menu command and select corresponding record from the lookup. The phone number from the call will be added to the Communication options detail of the selected record.

To display call connections to contacts, accounts and other records, select the Show all connections menu command. Connected account, contact and activity will be displayed below the general call information (Fig. 18).

Fig. 18 The call connections
scr_cti_history.png

You can connect the call to a system record by selecting a record type in the menu and clicking the scr_cti_button_choose.png button (Fig. 19).

Fig. 19 Bind a call
scr_cti_add_activity.png

Record calls 

Recording and playback of calls is available in Creatio if your Call Center supports this feature. Call recording and playback rules can be set up in such office call center as Webitell.

Note. Additional setup is required to enable call playback.

To play a call record, go to the History tab of the needed contact or account. Select the needed call record on the Calls detail and click the Play button (Fig. 20).

Fig. 20 Play a call record
scr_cti_start.png

Call records are played in a web player with basic playback options (Fig. 21).

Fig. 21 The record playback
scr_cti_listen.png

You can also download call record as an audio file by selecting the Download audio file menu command (Fig. 22).

Fig. 22 Download the call record file
scr_cti_down.png

Change your agent status 

Agent status menu is displayed when you click the user image located in the top right corner of the screen (Fig. 23).

Fig. 23 The agent status menu
scr_cti_operator_status.png

The list of available agent statuses depends on the telecommunications system that is used and can be set up in the User status for message exchange lookup.