Add template elements

PDF
Products
Marketing

Image 

The Image element (Fig. 1) displays images. This element consists of two parts: the image itself, and the image container.

Fig. 1 Adding an image
adding_image_from_toolbar.gif

Image setup area 

Use the setup area on the right to configure the image and the image container.

Fig. 2 Image setup area
scr_image_setup_area.png

Property

Function

Breadcrumb navigation (1)

Use “breadcrumbs” at the top of the setup area to navigate the parent (column, section, banner, block, and template) elements.

Image settings

Use the icn_content_designer_background_image.png field to upload an image from your computer or insert the URI of an image.

Note. The Image element supports Data URIs. You can insert a base64-encoded image instead of a URL.
Base64-encoded images are part of the HTML code of the message and are not normally filtered by email clients that prevent external images from loading by default.

Link to open – specify a URL to use the image as a hyperlink.

Title – specify the text to display when the user hovers the mouse pointer over the image.

Note. The title text is often used to describe things unclear at first glance.

Alternative text – specify the alternative text. In some email clients, a specific setting might disable images in the incoming emails. As a result, recipients will see alternative text instead of images. Populate the Alternate Text field with a description of the image so that recipients can see it instead of the icon to replace the missing image.

Size, px

Specify the width and height of the image.

By default, both Width and Height parameters have the “Auto” value. If you leave this parameter unchanged, the image will either stretch or shrink to fit the container.

Change one of the values to resize the image and keep the ratio.

Change both values to force resize the image to the specified height and width disregarding the ratio.

Align

Align the image horizontally (left btn_alignment_horizontal_left.png, center btn_alignment_horizontal_center.png, or right btn_alignment_horizontal_right.png).

Note. Alignment may produce no visible effect depending on the ratio of the image and the current ratio of the parent container.

Padding, px

Specify the distance (in pixels) between the image and each of the borders of the container.

Padding is specified separately for each side.

Corner radius

Specify the circular radius of the corners of the image. Leave this property empty for sharp corners. This defines the circular radius of all 4 corners of the image.

Note. Use the HTML element with inline or embedded CSS styles to specify elliptical corners and other exotic effects.

Background

Set background color for the entire image.

Background style settings are disabled by default. Select the checkbox (2) to enable them.

Clear this checkbox to disable all background settings of the current image.

Click content_designer_background_color.png to open the color picker and select the background color.

Note. The background completely fills the entire graphics container. For example, if the padding setting values are not set to 0, the background color should be visible around the image. If the image has transparent areas, the background color will be visible through them.

Borders

Configure the borders of the image.

Border style settings are disabled by default. Select the checkbox (3) to enable them.

Click border_color_picker.png to open the color picker and select the border color.

Update the icon_border_width.png field to specify the border width. To hide the border, select the “Hidden” border style.

Use the dropdown menu (4) to select the border style. When the border settings are enabled, the “Solid” style is selected by default. The following styles are available:

  • border_style_hidden.png – Hidden

    Note. The border is defined but invisible. The border width effectively equals 0.

  • border_style_dotted.png – Dotted

  • border_style_dashed.png – Dashed

  • border_style_solid.png – Solid

  • border_style_double.png – Double

  • border_style_groove.png – Groove

  • border_style_ridge.png – Ridge

  • border_style_inset.png – Inset

  • border_style_outset.png – Outset

Select or clear Top, Bottom, Left and Right checkboxes to enable or disable the border style settings for the corresponding border.

Button 

The Button element (Fig. 3) is designed for making clickable call-to-action buttons. Button elements are also referred to as a “call to action” (CTA) and are basically links presented as visually identifiable buttons.

Fig. 3 Adding a CTA button
adding_button_from_toolbar.gif

There is a difference between Button element and the HTML <button> element.
To insert the HTML <button> element, please use the HTML element.

Button setup area 

Use the setup area on the right to configure the button text, background, and shape.

Fig. 4 Button setup area
scr_button_setup_area.png

Property

Function

Breadcrumb navigation (1)

Use “breadcrumbs” at the top of the setup area to navigate the parent (column, section, banner, block, and template) elements.

Link to open

The URL specified in the Link to open area opens when a recipient clicks the button.

Font

Use this settings group to configure the font settings of the CTA button caption.

Content builder font set – select the font family of the button from the list of registered font families. To modify the list of fonts used in your template, update the “Content builder font set” lookup. Read more in the “Updating available Content Designer fonts” article.

Size, px – specify the width and height of the button in pixels.

Click font_color_picker.png to open the color picker and select the font color.

Line height, px – specify the spacing between the lines and the borders of the button.

The maximum height is 250px; the minimum line height cannot be less than the size of the font.

Letter spacing, px – specify the spacing between the characters in pixels.

Size, px

Specify the width and height of the button in pixels.

Align

Adjust the horizontal (btn_alignment_horizontal_left00001.png left, btn_alignment_horizontal_center00002.png center, or btn_alignment_horizontal_right00003.png right) and vertical (btn_alignment_vertical_top.png top, btn_alignment_vertical_middle.png center, or btn_alignment_vertical_bottom.png bottom) alignment for the button for the button.

Note. Selecting various vertical alignment settings is likely to produce no visible effect when trying them with the default sample CTA button because of the insufficient height.

Margin, px

Specify the distance (in pixels) between the borders of the CTA button and the adjacent borders of parent and sister elements.

In the Content Designer, you must specify the margin setting for each side individually.

Padding, px

Specify the distance (in pixels) between the CTA text and each of the borders of the container.

Padding is specified separately for each side.

Corner radius

Specify the circular radius of the corners of the button. Leave this property empty for sharp corners. This defines the circular radius of all 4 corners of the button.

Note. Use the HTML element with inline or embedded CSS styles to specify elliptical corners and other exotic effects.

Background

Set the button background color.

Background style settings are enabled by default. Clear the checkbox (2) to enable them.

Select this checkbox to enable all background settings of the current button.

Click border_color_picker00004.png to open the color picker and select the background color.

Borders

Configure the borders of the button.

Border style settings are disabled by default. Select the checkbox (3) to enable them.

Click border_color_picker00005.png to open the color picker and select the border color.

Update the icon_border_width00006.png field to specify the border width. To hide the border, select the “Hidden” border style.

Use the dropdown menu (4) to select the border style. When the border settings are enabled, the “Solid” style is selected by default. The following styles are available:

  • border_style_hidden00007.png – Hidden

    Note. The border is defined but invisible. The border width effectively equals 0.

  • border_style_dotted00008.png – Dotted

  • border_style_dashed00009.png – Dashed

  • border_style_solid00010.png – Solid

  • border_style_double00011.png – Double

  • border_style_groove00012.png – Groove

  • border_style_ridge00013.png – Ridge

  • border_style_inset00014.png – Inset

  • border_style_outset00015.png – Outset

Select or clear Top, Bottom, Left and Right checkboxes to enable or disable the border style settings for the corresponding border.

Text 

The Text element (Fig. 5) is used to add message text. This element has two configuration areas: the setup area and the rich text toolbar on the Text element itself.

Fig. 5 Adding the Text element
adding_text_from_toolbar.gif

Text setup area 

In the setup area, you can configure the baseline font settings and the style settings of the Text element.

Fig. 6 Text setup area
scr_text_setup_area.png

Property

Function

Breadcrumb navigation (1)

Use “breadcrumbs” at the top of the setup area to navigate the parent (column, section, banner, block, and template) elements.

Font

Use this settings group to configure the baseline font settings of the Text element.

Content builder font set – select the font family of the text from the list of registered font families. To modify the list of fonts used in your template, update the “Content builder font set” lookup. Read more in the “Updating available Content Designer fonts” article.

Size, px – specify the width and height of the button in pixels.

Click  to open the color picker and select the font color.

Line height, px – specify the spacing between the lines and the borders of the button.

The maximum height is 250px; the minimum line height cannot be less than the size of the font.

Letter spacing, px – specify the spacing between the characters in pixels.

Size, px

Size, px – specify the width and height of the button in pixels.

Align

Align the baseline text horizontally (left icon_text_align_left.png, center icon_text_align_center.png, right icon_text_align_right.png or justify icon_text_align_justify.png).

Height, px

Specify the height of the text container (in pixels).

This field is used to specify the fixed height of the text container. It will not stretch or shrink to fit the text inside.

Padding, px

Specify the distance (in pixels) between the text and each of the borders of the container.

Padding is specified separately for each side.

Background

Set background color for the text.

Background style settings are disabled by default. Select the checkbox (2) to enable them.

Clear this checkbox to disable all background settings of the current spacer.

Click content_designer_background_color00017.png to open the color picker and select the background color.

Divider 

The Divider element (Fig. 7) is used for separating adjacent elements with horizontal lines or margins.

Fig. 7 Adding a divider
adding_divider_from_toolbar.gif

You can use the setup area to configure the height of the divider and the color and width of the horizontal line.

Fig. 8 Divider setup area
scr_divider_setup_area_callouts.png

Property

Function

Breadcrumb navigation (1)

Use “breadcrumbs” at the top of the setup area to navigate the parent (column, section, banner, block, and template) elements.

Divider options

Use this settings group to configure the width of the horizontal line, its color, width, and style.

Padding, px

Specify the distance (in pixels) between the horizontal line and each of the borders of the divider.

Padding is specified separately for each side.

Background

Use this settings group to toggle background options on and off, and to select the background color.

Navbar 

The Navbar element (Fig. 9) is a navigation bar containing a list of menu links. The navbar element can be configured differently for mobiles.

Fig. 9 Adding a Navbar
adding_navbar_from_toolbar.gif
Fig. 10 Navbar setup area
scr_navbar_setup_area.png

Property

Function

Breadcrumb navigation (1)

Use “breadcrumbs” at the top of the setup area to navigate the parent (column, section, banner, block and template) elements.

Navbar constructor

Add, remove, and move the navigation links.

To access the setup area of a navlink, click the corresponding item in the navlink list.

Click Add link to add a link

Click content_section_item_view_model_remove_icon00066.png to remove a link (last link cannot be removed).

Align

Align the navlinks in the navbar.

Hamburger menu

Enable “hamburger” menu on mobile devices, displaying menu links one over another.

Icon align

Align the hamburger menu icon horizontally (left btn_alignment_horizontal_left00067.png, center btn_alignment_horizontal_center00068.png or right btn_alignment_horizontal_right00069.png).

This property is only available if the hamburger menu is enabled.

Icon color

Click  to update the hamburger menu icon color.

This property is only available if the hamburger menu is enabled.

Navlink 

The Navlink element (Fig. 11) is a navigation link for the parent navigation bar containing a list of navigation links.

Fig. 11 Adding navlink
adding_navlink_from_toolbar.gif
Fig. 12 Navlink setup area
scr_navlinik_setup_area.png

Property

Function

Breadcrumb navigation (1)

Use “breadcrumbs” at the top of the setup area to navigate the parent (column, section, banner, block and template) elements.

Link to open

Provide the URL to the desired destination in the Link to open area.

Font

Use this settings group to configure the font settings of the link.

Content builder font set – select the font family of the menu link from the list of registered font families. To modify the list of fonts used in your template, update the “Content builder font set” lookup. Read more in the “Updating available Content Designer fonts” article.

Size, px – specify the width and height of the font in pixels.

Click  to open the color picker and select the font color.

Line height, px – specify the spacing between the lines and the borders of the button.

The maximum line height is 250px; the minimum line height cannot be less than the size of the font.

Padding, px

Specify the distance (in pixels) between the text and each of the borders of the container.

Padding is specified separately for each side.

Spacer 

The Spacer element (Fig. 13) is used for separating adjacent elements with empty spacer (an invisible horizontal line).

Fig. 13 Adding the Spacer element
adding_spacer_from_toolbar.gif
Fig. 14 Spacer setup area
scr_spacer_setup_area.png

Property

Function

Breadcrumb navigation (1)

Use “breadcrumbs” at the top of the setup area to navigate the parent (column, section, banner, block, and template) elements.

Size, px

Update the Height field to specify the thickness of the spacer.

Background

Set background color for the spacer.

Background style settings are disabled by default. Select the checkbox (2) to enable them.

Clear this checkbox to disable all background settings of the current spacer.

Click content_designer_background_color00018.png to open the color picker and select the background color.