Skip to main content
Version: 8.1

Sub-process element

Level: beginner

Use the Sub-process element (Fig. 1) to run a business process from another process.

Fig. 1 Sub-process element in a business process diagram
Fig. 1 Sub-process element in a business process diagram
 

Using the Sub-process element to run other processes has the following specifics:

  • Process parameter values can be passed from the parent process to its sub-process and vice-versa. This means that you can run a sub-process with specific parameter values, and after the sub-process completes – use its results in the parent process.

  • The Sub-process element will activate its outgoing flows only after the corresponding sub-process is complete.

  • If any of the incoming parameters of the Sub-process element are mapped to a data collection, the element will run in the multi-instance mode:

    • The Sub-process element will run a separate instance of the sub-process per each instance of the incoming collection.
    • The Sub-process element will return an outbound data collection populated with outbound and bi-directional parameters returned by every sub-process instance.
    • The Sub-process element will complete its execution when all sub-process instances are complete.

Using sub-processes is recommended to avoid creating process diagrams that are too large and complex to efficiently use or maintain. In addition, large process diagrams are more resource-heavy. The Sub-process element also enables re-using business processes that already exist in Creatio. For example, you can use the Sub-process element in an opportunity process that includes a “Meeting with customer” stage, which exists as a separate business process in Creatio.

Sub-process element operation

Based on the type of its incoming parameter values (regular or collection) a sub-process element can run in a “single instance mode,” or “multi-instance mode,” which in turn can be sequential or parallel.

Single instance mode

The Sub-process element runs in the “single instance mode” if none of the sub-process parameters are mapped to a data collection.

Execution

When the incoming flow is activated, the Sub-process element activates the  Simple start event of the process specified in the Which process to run? field.
As a result, the actual version of the sub-process is launched as a new independent process instance.
If any of the incoming and bi-directional process parameters are populated in the Process parameters block of the Sub-process element, the sub-process will run with those parameter values.
If you save another version of the sub-process as “actual” after the Sub-process element has been launched, the element will continue executing the version that was actual at the time of the Sub-process element activation. The new sub-process version will be used on the new activation of the Sub-process element. The active instance of the sub-process version that was “actual” when the Sub-process element was launched will continue running normally.
The sub-process log page, which displays the sub-process tasks on the Process elements detail in the order of their execution, is available as a separate process instance in the  Process Log section and as a clickable process task in the Process elements detail of the parent process.

Completion

The Sub-process element is considered complete when the corresponding sub-process instance completes its execution.
Upon completion, the Sub-process element updates its parameter values from the corresponding parameters of the completed sub-process instance and activates its own outgoing flows.

Sequential multi-instance mode

The Sub-process element runs in the “sequential multi-instance mode” when at least one of the sub-process elements is mapped to a data collection and the “Sequential” execution method is selected. The sequential execution method is selected by default when a sub-process is mapped to a data collection.

note

Use the Execution method parameter to select the sequential or parallel execution method. Selecting the execution method is unavailable when none of the process parameters are mapped to a data collection. More information on the parameters of the Sub-process element is available in the “Sub-process element parameters” section of this article.

Execution

When its incoming flow is activated, the Sub-process element starts looping through the data collection. For each item of the data collection, the Sub-process element runs a new instance of the process specified in the Which process to run? field by activating the  Simple start event of the sub-process.
As a result, the currently actual version of the sub-process launches as a new independent process instance for each item in the data collection as soon as the previous sub-process instance is complete. Read more in the “Working with collections” article.
The incoming and bidirectional sub-process parameters (specified in the Process parameters block of the Sub-process element) can be mapped either to process elements from the same data collection or to non-collection elements. Non-collection process parameters will be re-used in all sub-process instances.
If you save another version of the sub-process as “actual” after the Sub-process element has been launched, any new sub-process instance will use the newest actual version to date. This means that the first instance of the sub-process and any other instances that ran before updating the actual version of the sub-process will use the previous version. We do not recommend saving another sub-process version as actual until all instances of the sub-process are either complete or canceled.
Note that the sub-process creates a separate instance in the  Process Log section, which displays the sub-process tasks in its Process elements detail in the order of their execution. The parent process instance displays the link to the list of sub-process instances as a regular clickable process task in its own Process elements detail.

Completion

Upon completion of all sub-process instances, the element creates an entry in the outgoing data collection and populates the entry with parameter values from the corresponding parameters of the completed sub-process instance. After that, the next sub-process instance will be launched.
The Sub-process element is considered complete when the last sub-process instance is complete. Upon completion of the last instance, the Sub-process element updates the outgoing data collection and activates its own outgoing flows. Read more in the “Working with collections” article.

Parallel multi-instance mode

The Sub-process element runs in the “parallel multi-instance mode” if at least one of the sub-process elements is mapped to a data collection and the parallel execution method is selected.

note

Use the Execution method parameter to select the sequential or parallel execution method. Selecting the execution method is unavailable when none of the process parameters are mapped to a data collection. More information on the parameters of the Sub-process element is available in the “Sub-process element parameters” section of this article.

Execution

When its incoming flow is activated, the Sub-process element starts looping through the data collection. For each item of the data collection, the Sub-process element runs a new instance of the process specified in the Which process to run? field by activating the  Simple start event of the sub-process.
As a result, the currently actual version of the sub-process launches as a new independent process instance for each item in the data collection immediately, barring limitations on the number of active background processes. Read more in the “Working with collections” article.
The incoming and bidirectional process parameters specified in the Process parameters block of the Sub-process element can be mapped either to process elements from the same data collection or to non-collection elements. Non-collection process parameters will be re-used in all sub-process instances.
If you save another version of the sub-process as “actual” after the Sub-process element has been launched, any new sub-process instance will use the newest actual version to date. Changing the sub-process actual version immediately after running a parallel multi-instance sub-process will not affect the first instance and any other instances that have already launched. Any instances that run after the change will use the new version. We do not recommend saving another sub-process version as actual until all instances of the sub-process are either running, complete or canceled.
Note that the sub-process creates a separate instance in the  Process Log section, which displays the sub-process tasks in its Process elements detail in the order of their execution. The parent process instance displays the link to the list of sub-process instances as a regular clickable process task in its own Process elements detail.

Completion

Upon completion of each instance, the Sub-process element creates an entry in the outgoing data collection and populates the entry with parameter values from the corresponding parameters of the completed sub-process instance.
Note that the order of data entries in the collection cannot be predicted.
The Sub-process element is considered complete when the last remaining sub-process instance is complete. Upon completion of the last instance, the Sub-process element updates the outgoing data collection and activates its own outgoing flows. Read more in the “Working with collections” article.

note

The actual version of the process used as the sub-process can be found in the Versions detail of the Process versions tab when you select this process in the Process Library record list and click Properties.

Sub-process element parameters

Which process to run?

Specify a business process to use as the sub-process:

  • you can select an existing Creatio business process to use it as a sub-process from the drop-down list
  • you can add a new process via the Process Designer by clicking btn_button_connections00035.png if the needed process is not available on the list

btn_chapter_designer_user_task_designer_task00036.png – opens the process selected as a sub-process in a new Process Designer window.
Note that to be eligible as a sub-process, a business process must start with a  Simple start event.

Execution method

Only available in the multi-instance mode. To enable the multi-instance mode, map at least one of the process parameters to a data collection. Read more in the “Working with collections” article.
Select one of the two execution methods:

  • Sequential. Sub-process instances run successively; a new sub-process instance runs upon completion of the previous instance. This is the default method.
  • Parallel. Sub-process instances run simultaneously; the Sub-process element does not wait for the completion of the already running instances before running a new instance. Sub-process instances may complete in a different order.

Process parameters

When you select an existing Creatio process from the list, the parameters of the selected process are displayed in this block of the Sub-process setup area. You can populate the parameter values to run the sub-process with these values. During the execution of the sub-process, these values can be populated or updated, based on the logic of each specific sub-process. You can also map subsequent elements of the parent process to these parameters.
To add/edit/delete the element parameters, modify the process selected in the Which process to run? field.
Before making any changes to a business process, which is used as a sub-process, make sure that such changes will not affect other processes. For example, if you edit the data type of a parameter and change it from the “Lookup” value to “Boolean” in a business process, this may lead to errors in any processes that use it as a sub-process.
Please check the Used as sub-process in processes detail of the Launch options tab in the Process Library before modifying an existing process. If this process has any sub-processes of its own, they will be displayed in the Sub-processes detail of the Sub-processes tab.


See also

Use sub-processes

Process collections